Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Inglewood, CA
Most chimney repair calls in Inglewood start the same way: a homeowner notices a chunk of clay tile in the firebox and realizes the flue has been quietly failing for years. The older homes here, built between the 1920s and 1940s, were made with masonry fireplaces and clay-tile liners that have now spent eight decades absorbing heat, moisture, and the vibration of life near the 405. Tidewater Chimney Sweep handles the full repair, from cracked crowns to liner restoration, and we work with materials like HeatShield and DuraFlex that most basic sweep companies do not stock. If you are seeing debris or suspect your flue is compromised, call us at (866) 282-7014.
Why Inglewood Homes Are Different
Inglewood’s housing stock gives chimney work here a particular character. The 1920s and 1930s stucco bungalows and Spanish-style homes in the flats around 90302 and 90303 were built with full masonry fireplaces and clay tile liners. Those liners are now at the end of their service life in many homes, and because Inglewood rarely gets a hard freeze, the failure mode is not frost heave but slow spalling: the tile surfaces flake off piece by piece until gaps open up. We see this constantly on sweep-and-inspect calls where the creosote layer is actually thin, but the flue itself is falling apart.
The mild coastal climate shapes how fireplaces are used, too. Inglewood residents burn on scattered cool evenings from November through February, often with slow, smoky fires that leave a thin but glazed creosote residue. That fine layer can be removed with care, but we have to inspect more closely for the structural problems underneath. During Santa Ana wind events, draft reversal becomes a real complaint in homes near the 405 corridor and the old LAX flight path, where steady vibration and wind have loosened caps and mortar joints over the years. In the 90303 area, we also run into add-on guest house or second flue setups from older unpermitted work, which need to be inspected and swept as separate systems.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Inglewood Services
Inglewood homeowners call us most often for two reasons: the annual or biennial sweep that keeps a working fireplace safe, and dryer vent cleaning for the electric or gas dryer vent line. Both are safety services first.
Chimney Sweep in Inglewood
An Inglewood chimney sweep here is not a quick brush-through. We start with the full flue, checking for spalled clay tiles, glazed creosote, and any cap or crown issue that has developed since the last burn season. The mild climate means creosote is usually thinner than in colder mountain towns, but it often comes in a hard, shiny glaze that resists basic sweeping. We remove it properly and report what we see. For the full scope of our sweep process in this city, see Chimney Sweep in Inglewood.
Dryer Vent Cleaning in Inglewood
Many Inglewood homes route dryer vents through crawl spaces or out under raised foundations, which makes lint accumulation a slow, invisible problem. We clean the full vent run from dryer to exterior termination, including those long, awkward stretches common in older bungalows. Lint is a leading cause of residential fires, and the same inspection discipline we bring to chimney work applies here. Read more on Dryer Vent Cleaning in Inglewood.
Chimney Repair in Inglewood
Chimney repair in Inglewood is driven by one fact: the original clay tile liners and masonry crowns on 1920s to 1940s fireplaces are now failing. This is not a creosote problem. It is a structural, moisture-driven problem that affects how safely the chimney moves smoke and heat. We repair and restore these systems with HeatShield liner restoration and DuraFlex relining products, the same materials commercial contractors specify, and our full repair scope is detailed on our Chimney Repair page.
Chimney Cap Installation
Signs you need it
You hear the wind howl through the flue during Santa Ana events, find birds or nesting debris in the firebox, or notice water staining on the ceiling near the chimney chase.
What it costs in Inglewood
Chimney cap installation in Inglewood typically runs $345 to $680 depending on the flue size and whether the crown needs prep work before the cap can seat correctly.
How we do it
We measure the flue opening, select a properly sized cap from our stock, secure it to the crown or flue tile with mechanical fasteners, and check that the screen mesh is intact before we leave.
Chimney Liner Installation
Signs you need it
A sweep or camera inspection shows gaps, cracked tiles, or missing sections in the existing clay liner, or you see tile pieces falling into the firebox after burning.
What it costs in Inglewood
Chimney liner installation in Inglewood falls between $3,200 and $4,900 for most single-flue masonry chimneys, including the liner kit, insulation, and terminations.
How we do it
We run a camera to confirm the flue dimensions, pull the appropriate DuraFlex or Olympia Chimney liner through, insulate the annular space, and reconnect the appliance or fireplace to the new liner with a proper top plate and cap.
Chimney Flashing Repair
Signs you need it
Water stains appear on the ceiling or wall where the chimney passes through the roof, especially after the first real rain of the season hits Inglewood.
What it costs in Inglewood
Chimney flashing repair in Inglewood ranges from $495 to $1,100, depending on how much of the existing flashing can be salvaged and whether the roofline is steep or two-story.
How we do it
We remove the old flashing and sealant, cut new step and counter flashing from aluminum or copper stock, interweave it with the shingles or tile, and seal the transition with a high-grade polyurethane sealant.
Chimney Crown Repair
Signs you need it
The concrete crown on top of the chimney shows cracks, spalling, or missing sections, and water is pooling on the crown surface after rain rather than running off.
What it costs in Inglewood
Chimney crown repair in Inglewood generally costs $795 to $1,350 including removal of the damaged surface, a new float-finished crown, and resealing around the flue tiles.
How we do it
We remove the deteriorated crown material, build a form or float a new crown with proper slope away from the flue, and seal the crown and flue joint with a weather-resistant crown coat.
What Chimney Repair Costs in Inglewood
| Item | Typical range in Inglewood |
|---|---|
| Chimney cap installation | $345 – $680 |
| Chimney flashing repair | $495 – $1,100 |
| Chimney crown repair | $795 – $1,350 |
Does HeatShield really work on an 80-year-old Inglewood chimney?
Yes. HeatShield is a ceramic-cement restoration system applied from inside the flue to seal gaps and rebuild compromised clay tiles. It is a legitimate alternative to a full liner tear-out for many older Inglewood fireplaces.
Can I keep using my fireplace if I see tile pieces in the firebox?
No. Tile pieces in the firebox mean the flue liner is actively failing, and those gaps can allow heat transfer to combustible framing. Stop burning and call (866) 282-7014 so we can camera the flue and tell you what is actually failing.
Brands We Service in Inglewood
We work on fireplaces and chimneys built with Olympia Chimney, Famco, Copperfield, and DuraFlex components, and we carry many of those replacement parts locally for Inglewood jobs. That shortens turnaround when a cap, liner, or termination needs to be matched. See our brands for the full list of what we stock and install.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Inglewood, CA
| Service | Typical range in Inglewood |
|---|---|
| Chimney sweep | $189 – $329 |
| Dryer vent cleaning | $95 – $140 |
| Chimney cap installation | $345 – $680 |
| Chimney cap replacement | $390 – $725 |
| Chimney flashing repair | $495 – $1,100 |
| Chimney crown repair | $795 – $1,350 |
| Chimney liner installation | $3,200 – $4,900 |
| Chimney liner restoration (HeatShield) | $1,800 – $3,400 |
In Inglewood, the biggest price drivers are access: two-story rooflines, steep pitches on Spanish-style homes, and flues that have been boxed in by add-on construction. Some 90303 guest-house setups have separate flues that double the inspection and cleaning scope. Every quote is a fixed price agreed before work begins, and we never recommend a repair without camera evidence you can see for yourself.
Neighborhoods We Serve in Inglewood
We work throughout Inglewood, from the 1920s bungalows of the flats to the 1960s ranch tracts around Morningside Park and North Inglewood. Response times vary by week, but most Inglewood appointments can be scheduled within five to seven business days, with sweeps often available sooner outside the fall rush.
- Morningside Park
- North Inglewood
- Downtown Inglewood
- Lockhaven
- Century Heights
Service Area – Cities Near Inglewood
While this page covers Inglewood specifically, our service area extends into the surrounding communities. We also handle chimney and vent work in Central-Alameda, CA, Koreatown, CA, South Gate, CA, and Santa Monica, CA. If you are on the edge of Inglewood and one of these cities, call us and we will confirm your street is in range.
Serving Inglewood, CA – Our Local Coverage Area
We’re based in the Inglewood area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Inglewood
Most sweeps in Inglewood can be scheduled within five to seven business days, and we recommend booking before October if possible. Fall is the busiest season, and wait times stretch. Call (866) 282-7014 for the next open slot.
Most liner restorations and cap replacements do not require a city permit. Structural rebuilds or full teardowns may, and we will tell you if your job crosses that line before any work is scheduled or priced.
Yes. Many Inglewood properties in the 90303 area have second flues from older add-on or guest-house work. Those must be swept and inspected separately from the main house flue, and we price them as independent systems.
If your Inglewood chimney needs a sweep, a repair, or a straight answer about whether that cracked tile is actually a problem, call Tidewater Chimney Sweep at (866) 282-7014. We will schedule the inspection, show you the camera footage, and give you a fixed quote before any work starts.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Inglewood Customers Say
"Older house, weird setup, previous owner did some creative things. He didn't sigh or roll his eyes, he just figured it out. Took him a while but he got there."
- Steve Novak"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Cedric Whitfield"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Reggie Coleman